We worked closely with the client to design this unique bed with an adjustable headboard and working drawer system for storage. The posts were designed to replicate features in the client’s existing mirror. There are various raised and recessed elements that add depth and pleasing aesthetics to this bed.
This Honduras mahogany dining table is constructed using a single board top. The cross rail ends are pinned which allows the table to be disassembled easily for transport. The cross rails are finished with a unique custom metal plate. The finish is hand rubbed to achieve a rich patina. 30″ H x 12′ L x 39″ W
The mahogany basin stand was used as a wash stand where the top held a bowl, probably Chinese export, three rings for soap dishes and the bottom for a bottle that held water. Three separated concentric circles of wood are held together by fluted pillars and turned balusters. The lignun vitae bosses are fixed under the bottom shelf. The top part is supported by a fluted column of ample size as is the tripod base ending in a five-toed paw foot. The antique finish is hand applied and rubbed to achieve a rich patina.
This basin stand is probably carved by John Townsend, as stated by Joseph Downs, American Furniture, Queen Anne and Chippendale Periods, New York, 1952, no. 218. Sotheby’s – The Garbisch Collection, 1980, Volume IV, no 1160. It sold for $17,000.
Image #9 shows the basin stand in its original location at the Garbisch House in Cambridge, MD.
32″ H x 10 7/8″ W Newport – c. 1960 – 1765
Read an article in the Kent News
An audio discussion with Peter Kenny
This reproduction was commissioned by a customer from the likeness of another chair. It has an ogee crest attached with screws to a two piece flat arm rail. The arms have circular pads. The flat faced splats are canted at the edges from front to back. They are tenoned into the plinths and arm rail. The continuous turned posts are tenoned into the arm rail. The front leg is an extension of mortised seat rails and ends in a pad foot. The cross stretchers are held together in the center by a double rabbet. The antique finish is hand applied and rubbed for a rich patina. Chair 30 3/4″ H Seat 17 1/4″ H
Commissioned by a local church in the community, this Walnut Communion Table was an original design based on the existing wood in the church, a perfect blend of old and new. The antique finish is hand applied and rubbed to achieve a rich patina. Size is specific to customer’s needs.
This cherry cabinet has veneer sides and solid wood in the front. Drawers are fully dovetailed. Mortise and tenon construction is used throughout. The finish is hand applied and rubbed to achieve a rich patina. We build stand alone cabinets which are designed to your specific needs.
This bed step is functional and includes additional storage. The frame is mortise and tenon construction. The finish is hand applied and rubbed for a rich patina. This can be designed to fit any bed to meet your specifications.
This sceptre was made for a retiring college administrator. The wood is elm which came from a tree on the college’s campus. The applied medallions are hand carved as is the upper turning. The antique finish is hand applied and rubbed to achieve a rich patina.
Commissioned by a ranch owner in Colorado near Telluride. The oak frame is mortised and tenoned with free moving panels. Walnut surrounds are used for aesthetic effect and the center carved medallions are made to designate the ranch name. The drawers are fully dovetailed with white cedar bottoms. The antique finish is hand applied and rubbed to achieve a rich patina. Can be built to your specifications to meet your needs.
This customer commissioned a carved shell applied to the headboard. The bedrails are attached by bolts through a secure tenon for strength. The drawers below are fully dovetailed with white cedar bases and ride on a custom wood T-frame. The tester is supported by reeded turned posts and is finished with finials. The antique finish is hand applied and rubbed to achieve a rich patina. Can be built to your specifications to meet your needs. Our beds can be custom built to your specifications.
The top has a molded edge with notched corners. The back and side boards are pegged to the stiles. The front skirt and drawer blades are tenoned and pegged into the stiles which lead to graceful cabriole legs ending in trifid feet composed of alternative cavettos and ovolos. The brass is sand cast. The antique finish is hand applied and rubbed to achieve a rich patina.
Tiger Maple with secondary woods of pine, poplar and white cedar.
This custom bedroom suite includes two beds, two bedside stands and a dressing table. The finish is hand applied and rubbed for richness.
An attractive Queen Anne style bed for your favorite pet. The finish is hand applied and rubbed for a rich patina. Cushion is extra. 29″ W x 19″ D x 10″ H Custom sizes available.
We have built various trophies over the years for specialized sporting dog events. They are custom made to accept any ornamental medallion or figure. The base has a molded edge and the top block has a chamfered edge. These setter figures are cast and attached by threaded screws through the base and felt is applied to the bottom. The finish is hand applied and rubbed to achieve a rich patina. Can be built to your specifications to meet your needs.
This veneered cabinet, shown in walnut, has fully dovetailed drawers. The carcass is joined using mortise and tenon construction. The finish is hand applied and rubbed for a rich patina. This cabinet can be designed to your specifications.